
‘Damn the painting plans, build the bloody house’
The super glue catastrophe hit hard but this morning I decided to buy a second Carver Lane kit and use my current one as the learning project. In a real workshop space, I would continue with my module scheme but in my reality that is not possible
The MDF construction will be finished today and tomorrow I will lay the roofing tiles. I have to cut and lay each row, fit around the chimney and the inset windows.

Down pipes, plus. Some seriously scary bits in here. Most obviously the down pipes. Beautiful but fragile. There are two pipes and I’ll discuss them separately. The other tricky bit was the large window. It has 8 panes, inserts to be removed. The 4 rectangular insert come out well. Firm pressure is all that is needed. The larger, irregular inserts are divided by some thin frames. These frames will twist and snap if you try to force the inserts. I used my little bolt to apply pressure quickly and directly over the connector tab. This put all the force straight down the side of the frame and avoids twisting it.
The pipes! So thin! I could not use my trusty, skinny bolt. Even that was too big for the narrow pipes. I eventually used the rounded end of my jewelers tweezers. It was still scary, working my way down the length of the pipe, identify each connector and pushing down to snap it. Fixing the first pipe was easy. The precision cutting made fitting the wall fixtures simple. A little drop of super glue inside the wall hole and push the fitting in. The down pipe fit into the wall clamps just as easily. Again a drop of glue in each of the 4 clamps and the pipe drops in. Just remember to put glue on the collector box to connect to the gutter.





