Step 2 – kit preparation

MDF Sheets

Paint prep

MDF is a damned nuisance to paint.  No matter where you go, the common advice is ‘undercoat first’.
If I was making a plastic kit, or any kit with pieces on a ‘sprue’, I would paint them on the sprue.  You can get to all surfaces.  MDF sheets, not so!  The majority of the laser cut surfaces are working faces.  When you pop it from the sheet and glue it to another piece, that dark brown surface will be exposed and require painting.  Impossible to prepare while still in the sheet.

soldier sprue

Module prep

My approach will be, to modularise.  I will construct the discrete modules, prep and maybe even paint them, then glue them together.
For example, the building’s four walls will be one module when glued.  The balcony is one module.  I will complete the balcony, rusting, weathering, everything.  When I have the rear wall painted, I will glue the balcony to the wall.  Sounds simple, ay?  Scares the whatsit out of me.  We will get into painting a little later.

Balcony module

Here is one I prepared earlier (12 months earlier!).  This module will be primed with a black undercoat.  Why black?  All the metal work at Carver Lane will be prepped with black.  The final appearance could be weathered copper, but not!  Everyone knows that copper and bronze get a green patina, verdigris.  The finish of Carver Lane metal is stained rust, surface rust without any corrosive damage.  The black provides a dark base on which to put layers of brown based, rust paints and red/orange mixes and whatever else I need to create the look of aged metal.

House module

Not prepared earlier!  The illustration is from the instruction booklet, showing the house with the last two roof sections being applied.  It shows more detail than I want to have in my module.  The windows and doors require a powder blue finish.  While I am happy for them to have the same primer as the rest of the house (grey), I have not decided if I will apply the powder blue finish before or after the fixtures have been glued into the house walls.  I want to use my expensive new airbrush kit but I know I do not have the skills to apply the blue without considerable over spray onto the walls. Oh decisions, decisions.

PS. as soon as I have constructed the house module I will replace the current image and rewrite this section in the correct context. Ah joy.